[U-Boot-Users] Sector size with CFI driver?

[Timur Tabi]

Tolunay Orkun wrote:

> 3) In previous message you listed your configuration having 2 banks. Do 
> you really have two banks of flash? (each having 8MB? with a total of 
> 16MB) 

I have two 8MB flash chips (29LV640) on the board.  The first starts at 
fe000000 and the second at fe800000.  I have a jumper that can swap the two chips.

> 4) Check the syntax of erase command. You can specify the erase range in 
> terms of block numbers instead of addresses as well.

I'll try that.  Thanks.

-- 
Timur Tabi
Linux Kernel Developer @ Freescale