[U-Boot-Users] copy to flash ... outside available flash

[Martin Krause]

Hi Thomas,

u-boot-users-bounces at lists.sourceforge.net wrote on :
[...]
> This means I have 8 MB o flash. I can copy a Block of 0xFFFFF Bytes
> from 
> the RAM for example to 0x40100000. and I can copy the same Block to
> 0x40200000 or to 0x40300000.
> But if I copy a block that is larger than 0xFFFFF to any location it
> claims that I copy outside available Flash. This is stupid and wrong.
> Ramdisk image size was 0x18CFC9
> Baseaddress:	0x40100000
> ramdisk size: +	0x0018CFC9
> ------------------------------
> end address     0x4028CFC9
> 
> And this adress is surely not outside my flash. What is going on here?

Could you please post the commands you used to load the image and copy
it to flash, including the returned error message?

Regards,
Martin