[U-Boot-Users] u-boot reloacting to SRAM instead of SDRAM
junijoseph at yahoo.co.in
Tue Nov 14 19:52:17 CET 2006
We have a requirement in an MPC8540 based custom board,for the board to boot-up independent of SDRAM.
So, we are trying to map SRAM in place od SDRAM in u-boot. Though we succeeded bringing-up the board with this change, we see the behaviour being very flaky.
Though the board boots up without SDRAM module (say 2 /10 times), this happens only intitiating the boot-up from BDI.
Otherwise it hangs while reading the CPU clock or configuring base registers. The board never comes up stand alone.
I think this happens while reading from Global Data / Initial stack which is supposed to be running from SDRAM , now moved to SRAM.
I did browse through the u-boot mailing list to see any similar case, but don't and thats the reason I am asking for help.
So, my question is is it possible to run u-boot by relocating to SRAM instead of SDRAM ?
Any help is appreciated.
Yahoo! India Answers: Share what you know. Learn something new
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the U-Boot