[U-Boot-Users] STX AMC8548 board
rorpe at rambus.com
Thu Nov 16 07:42:26 CET 2006
Anybody here is using AMC8548 board from STx.
I am working on the board and the problem is that I don't know how
exactly can one see the RapidIO registers of the board?
I saw the mapping for RapidIO board to be at C0000 location. But that
location does not show any valid data. I used command "md c0000" for
Does ccsr location play any part in this?
I also tried using "md e00c0000" as ccsr location is e0000000.
Or am I missing anything.
I also want to know how exactly can one generate the RapidIO traffic.
I want to validate RapidIO controller on FPGA connected to AMC8548.
More information about the U-Boot