[U-Boot-Users] boot kernel from u-boot

[Reeve Yang]

My customized board has MPC8345E (almost same as mpc8349) processor and 128M
sdram.  Now we're trying to boot kernel from u-boot, I downloaded kernel
image on locate 0xff300000, and I verified the flash contents which are
written successfuly. However, when I try to boot it, it prints some
traceback then reset.

=> go 0xff300000
## Starting application at 0xFF300000 ...
NIP: FF300000 XER: 00000000 LR: 0FFE17A8 REGS: 0f5d0c60 TRAP: 0700 DAR:
100D3000
MSR: 0002b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00

GPR00: 0FFE1798 0F5D0D50 CFD364C5 00000001 0F5D3334 00000010 FFFFFFFE
00000007
GPR08: 00000041 00000020 00000000 FFFFFFFF 00000030 9C4344C7 10000000
100D3000
GPR16: 00000000 00000000 00000000 0000000B 00000000 00000000 00000001
00000000
GPR24: 00000000 00000000 00000000 0F5D3334 FF300000 0F5D0F5C 10000618
00000001
Call backtrace:
0FFE1798 0FFE9A18 0FFE9D38 0FFE9FC0 0FFEB024 0FFEB20C 0FFE0B64
0FFD7670 0FFD64D8
Program Check Exception
Resetting the board.

Could anyone give some hints what could be problem? Does code enter kernel
or still in u-boot? How to decode traceback on linux? objdump?

Thanks.

- Reeve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061018/00cf27e7/attachment.htm