[U-Boot-Users] Uboot for ppc 405GP with vision probe

[Jerry Van Baren]

Thanh Nguyen wrote:
> Hi all, 
> 
> I'm in internship. It is the first time I use Uboot. I have to load the
> uboot binary in the flash (AMD 29VL461DH - 8MB - PPC 405GP) with vision
> Probe. But I got this error message from vision probe each time it tried
> to load the binary :  
> "Unable to communicate with the emulator. Please check the physical
> connection and use the terminal windows..."
> 
> I use the lastest version of Uboot : 1.1.4.  With the old binary (uboot
> 0.4.0), it works correctly. Thats why I think there is something wrong
> in my configuration walnut.h. I will appreciate a lot if anybody can
> give me a solution of this issue. 
> 
> Thanks a lot. 
> 
> NT

If it truly works with 0.4.0 and not with 1.1.4, I would speculate that 
your memory map with 1.1.4 is not compatible with your hardware... 
either your 1.1.4 image is in a different location or it is bigger.

Check your image sizes and locations (objdump for elf, less (the program 
;-) for S-record files, xxd and some luck if all you have is a 
VisionProbe binary lump).

gvb