[U-Boot-Users] Cleanup output of MPC83xx boards
Wolfgang Denk
wd at denx.de
Sun Aug 12 18:25:27 CEST 2007
Dear Kim,
I would like to suggest to clean up the output printed by most
MPC83xx boards a bit. What do you think about a patch like this one:
@@ ...
{
u32 msize = 0;
- puts ("Initializing\n");
msize = fixed_sdram ();
- puts (" DDR RAM: ");
return msize;
}
I think something like this should be applied toi the following files:
board/sbc8349/sbc8349.c
board/mpc832xemds/mpc832xemds.c
board/mpc8360emds/mpc8360emds.c
board/freescale/mpc8323erdb/mpc8323erdb.c
board/mpc8349itx/mpc8349itx.c
board/mpc8349emds/mpc8349emds.c
board/mpc8313erdb/sdram.c
Also, if I understand this correctly, these files use a hardwired
memory size. I this correct? Do you have any plans to bring this in
line with the normal U-Boot design philisophy which uses the
memsize() function to automatically detect and adjust for the size of
memory really present on a board, allowing to use the same image on
differing configurations?
Thanks, and best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Shakespeare's Law of Prototyping: (Hamlet III, iv, 156-160)
O, throw away the worser part of it,
And live the purer with the other half.
More information about the U-Boot
mailing list