[U-Boot-Users] Loading vxWorks by u-boot.

[Chris Fester]

Hi there Leonid,

It's been a long while, but here's the commands I used to boot vxWorks
on an mpc8641 processor:

setenv bootargs motetsec(0,0)host:74kap1 h=10.120.1.2 e=10.120.1.226
dcache on
tftpboot 0x2000000 8641D_74K_1
bootvx 0x2000000

'Course, you won't have to do the tftpboot command if you've already got
the image in flash.

Hope that helps,
Chris

On Wed, 2007-08-22 at 11:03 -0700, Leonid wrote:
> Hi All:
> 
> Did anybody use u-boot to load vxWorks? I have sequoia board (NOR flash)
> and when I tried simply boot vxWorks elf, it hangs. 
> 
> vxWorks native bootrom.bin works fine, booting the very same vxWorks elf
> perfectly.
> 
> Thanks,
> 
> Leonid.
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >>  http://get.splunk.com/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users