[U-Boot-Users] Loading vxWorks by u-boot.

[Leonid]

Hi, Chris:

Could you please clarify what 8641D_74K_1 image was? vxWorks elf,
binary, or some combination of bootrom and kernel?

Thanks a lot,

Leonid. 

-----Original Message-----
From: Chris Fester [mailto:cfester at iphase.com] 
Sent: Wednesday, August 22, 2007 12:40 PM
To: Leonid
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Loading vxWorks by u-boot.

Hi there Leonid,

It's been a long while, but here's the commands I used to boot vxWorks
on an mpc8641 processor:

setenv bootargs motetsec(0,0)host:74kap1 h=10.120.1.2 e=10.120.1.226
dcache on tftpboot 0x2000000 8641D_74K_1 bootvx 0x2000000

'Course, you won't have to do the tftpboot command if you've already got
the image in flash.

Hope that helps,
Chris

On Wed, 2007-08-22 at 11:03 -0700, Leonid wrote:
> Hi All:
> 
> Did anybody use u-boot to load vxWorks? I have sequoia board (NOR 
> flash) and when I tried simply boot vxWorks elf, it hangs.
> 
> vxWorks native bootrom.bin works fine, booting the very same vxWorks 
> elf perfectly.
> 
> Thanks,
> 
> Leonid.
> 
> ----------------------------------------------------------------------
> --- This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a
browser.
> Download your FREE copy of Splunk now >>  http://get.splunk.com/ 
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users