[U-Boot-Users] how memory mapping is done at reset

[yusuf khan]

hi all

i have one doubt....At reset we start executing from Flash,which is at
#CS0,in my system it starts with address 0x00000000..now after that  we call
the function cpu_init_f() which will remap the starting address of the flash
to 0x02000000...but after this PC is at somewhere greater than
0x00000000..so the next instruction should fail as CS0 is already
modified....

can anybody tell me how it is achieved....


thanks in advance

Yusuf
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071207/07843d32/attachment.htm