[U-Boot-Users] U-boot Single image which can handle multiple flash sector size
Srinath Iyengar
srinathiyengarr at gmail.com
Mon Dec 10 11:35:14 CET 2007
Hi Stefan,
Sure I will post it to mailing list and try your suggestions.
Thanks and Regards
Srinath
On 12/10/07, Stefan Roese <sr at denx.de> wrote:
>
> Hi Srinath,
>
> one note in front. Please send such questions to the mailing list. So a
> lot of
> other talented people have to opportunity answer our questions.
>
> On Monday 10 December 2007, Srinath Iyengar wrote:
> > I have an arm based board which can have one of the following serial
> > flashes
> >
> >
> > 8 MB flash with 64K sector size
> >
> > 16 MB flash with 64K sector size
> > 16 MB flash with 265K sector size
> >
> >
> > *My objective is to have a single u-boot binary (Image) which can
> handle
> > any of these flashes.*
>
> Should be possible with the CFI driver.
>
> > Currently I have found the means to get it work with compile time option
> to
> > differentiate between 64KB and 256KB sector size of Flash.
> >
> > I am finding it difficult to fix the issues with CFG_FLASH_SECT_SIZE
> > and CFG_ENV_SECT_SIZE
> > or CFG_ENV_SIZE values dynamically.
>
> Correct. Currently this is not supported.
>
> > (There should be some means by which I can determine
> CFG_FLASH_SECT_SIZE,
> > eventually CFG_ENV_SECT_SIZE and CFG_ENV_SIZE
> > after knowing the details about FLASH (probe).Even though we are filling
> > flash_info structure data after probing about flash we still have to
> live
> > with
> > compile time option for finding CFG_FLASH_SECT_SIZE, CFG_ENV_SECT_SIZE
> and
> > dependent Macros)
>
> Yes, a dynamic sector size configuration would be good.
>
> > Please let me know if my requirement is conflating with U-boot design
> > objectives in handling flash and any suggestions to fix this issue.
>
> An easy way to handle all your flash chips in one image (without this
> dynamic
> sector size detection) would be, if you set the CFG_ENV_SECT_SIZE to the
> max
> size you can have, that is 256k. You should set CFG_ENV_SIZE to a smaller
> size, something like 16k, so that saving the environment doesn't take too
> long.
>
> Best regards,
> Stefan
>
> =====================================================================
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
> =====================================================================
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071210/d3547d9d/attachment.htm
More information about the U-Boot
mailing list