[U-Boot-Users] porting u-boot 1.1.5 to at91sam9260

vibi vibi_sreenivasan at cms.com
Sat Dec 15 08:51:40 CET 2007


dear Marco Cavallini,
	thanks for your support.
	i will check it out.
thanks & regards 
vibi sreenivasan

On Sat, 2007-12-15 at 08:44 +0100, Marco Cavallini wrote:
> vibi ha scritto:
> > hello,
> > 	is there any one working on porting u-boot 1.1.5 to at91sam9260 soc.
> > 
> > i am going to do this activity,if there is anyone who is already working
> > on this please let me know.
> > 
> 
> vibi,
> this project already exists :-)
> 
> Getting the AT91 u-boot bootloader
> ---------------------------------------
> To get the u-boot bootloader up and running on an AT91 product you have
> to go through the following steps:
> 
>    1. identify on which u-boot revision the patches will apply
>    2. download the corresponding u-boot
> 
>       # wget ftp://ftp.denx.de/pub/u-boot/u-boot-x.x.x.tar.bz2
>       # tar xvjf u-boot-x.x.x.tar.bz2
>       # cd cd u-boot-x.x.x
> 
>    3. take the AT91 u-boot patch set and apply it on top of the original
> u-boot:
> 
>       # wget
> http://www.at91.com/repFichier/Project-218/u-boot-x.x.x_atmel_y.y.diff.bz2
>       # bzcat u-boot-x.x.x_atmel_y.y.diff.bz2 | patch -p1
> 
> You will now have a fresh copy of the AT91 u-boot.
> 





More information about the U-Boot mailing list