[U-Boot-Users] PPC405GP Ethernet Interrupts

[raj]

Hi  Stefan,

Thanks alot, yes it got mixedup...sorry...

I am going to use PPC405GP custom board, and in u-boot
I want to use one DMA Interrupt to transfer the data
from FPGA  to SDRAM memory. The same data need to
transfer to the host via Ethernet UDP packets without
using the Kernal.. Can I do...

Thanks
Raj
--- Stefan Roese <sr at denx.de> wrote:

> On Thursday 13 December 2007, Ben Warren wrote:
> > >> What is it you're trying to do? Interrupts will
> typically be disabled,
> > >> and what does that have to do with UDP?
> > >
> > > The interrupts *are* used on 4xx systems in the
> ethernet driver.
> >
> > Good to know. Sorry for the noise. I wonder about
> the second part of my
> > question, though.
> 
> It has nothing to do with UDP of course. Must be
> misunderstanding/mixup.
> 
> Ciao,
> Stefan
> 
>
=====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang
> Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194
> Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 
> Email: office at denx.de
>
=====================================================================
> 
>
-------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services
> for just about anything Open Source.
>
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 



      5, 50, 500, 5000 - Store N number of mails in your inbox. Go to http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html