[U-Boot-Users] PPC405GP Ethernet Interrupts

Stefan Roese sr at denx.de
Mon Dec 17 08:44:57 CET 2007


Hi Raj,

On Monday 17 December 2007, raj wrote:
> I am going to use PPC405GP custom board, and in u-boot
> I want to use one DMA Interrupt to transfer the data
> from FPGA  to SDRAM memory.

That's possible. You need to write some board specific code though.

> The same data need to 
> transfer to the host via Ethernet UDP packets without
> using the Kernal.. Can I do...

Yes, that's possible too. Here too, you need to write new code to do this of 
course.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================




More information about the U-Boot mailing list