[U-Boot-Users] error compiling u-boot 1.1.5 for at91sam9260ek

[Remy Bohmer]

Hello vibi,

I have similar problems on the AT91SAM9261-ek, and I use a hack
(attached) to be able to compile the code. It is not nice, but it
worked for me until I (or someone else) have time to figure it out
more deeply.

Maybe you have the same problem?


Kind Regards,

Remy

2007/12/17, vibi <vibi_sreenivasan at cms.com>:
> hi,
>         i have tried that patch.but when i compile the source for at91sam9260ek
> i am getting error that u-boot uses soft floating point where as
> libgcc.a in my cross-compiler tool chain uses hard floating point .
> but i compiled a working u-boot for at91rm9200dk using this tool chain,
> and here also -msoft-float option was given.
>
> has any one faced this kind of problem before?
>
> thanks & regards
> vibi sreenivasan
>
> On Sat, 2007-12-15 at 08:44 +0100, Marco Cavallini wrote:
> > vibi ha scritto:
> > > hello,
> > >     is there any one working on porting u-boot 1.1.5 to at91sam9260 soc.
> > >
> > > i am going to do this activity,if there is anyone who is already working
> > > on this please let me know.
> > >
> >
> > vibi,
> > this project already exists :-)
> >
> > Getting the AT91 u-boot bootloader
> > ---------------------------------------
> > To get the u-boot bootloader up and running on an AT91 product you have
> > to go through the following steps:
> >
> >    1. identify on which u-boot revision the patches will apply
> >    2. download the corresponding u-boot
> >
> >       # wget ftp://ftp.denx.de/pub/u-boot/u-boot-x.x.x.tar.bz2
> >       # tar xvjf u-boot-x.x.x.tar.bz2
> >       # cd cd u-boot-x.x.x
> >
> >    3. take the AT91 u-boot patch set and apply it on top of the original
> > u-boot:
> >
> >       # wget
> > http://www.at91.com/repFichier/Project-218/u-boot-x.x.x_atmel_y.y.diff.bz2
> >       # bzcat u-boot-x.x.x_atmel_y.y.diff.bz2 | patch -p1
> >
> > You will now have a fresh copy of the AT91 u-boot.
> >
>
>
> -------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services
> for just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fix-linker-error-at91sam9261ek-HACK.patch
Type: text/x-patch
Size: 2948 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20071217/403dfe18/attachment.bin