[U-Boot-Users] [PATCH] CFI: synchronize command offsets with Linux CFI driver

Hoi-Ho Chan hoiho.chan at gmail.com
Fri Dec 21 08:58:30 CET 2007


Hi,

    I have a little problem while detecting the manufacturer and device IDs
on a Spansion/AMD S29GL256N. It's a x8/x16 flash and set to run in x8 mode.
When u-boot is trying to do the unlock sequence and retrieve the
manufacturer and device IDs, since info->portwidth is still 2, it's writing
to addrs 0x1554, 0xAAA, 0x1554 instead of addrs 0xaaa, 0x555, 0xaaa. I
modified the code to temporary set info->portwidth to 1 before doing the
unlock seq and retrieving the manufacturer & device IDs and then restore it
back, then the ID retrievals work. Does anyone see the same problem as I do?

Thanks
Donald



Bartlomiej Sieka wrote:
> 
> Fixes non-working CFI Flash on the Inka4x0 board.
> 
> Signed-off-by: Bartlomiej Sieka <tur at semihalf.com>
> ---
> This patch differs from what is being done by the Linux CFI driver in that
> it
> uses 0x05 as the interface code for x16/x32 chips, per "Common Flash
> Memory
> Interface Publication 100" dated December 1.
> 
> Tested on the following Flash chips:
> x8 (interface 0x00) in 8 bit mode
> x8/x16 (interface 0x02) in 8 bit mode
> x8/x16 (interface 0x02) in 16 bit mode
> 
> The patch should be applied on top of commit
> 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22 in the u-boot-cfi-flash repo.
> 
> diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
> index 66754cd..b748a9f 100644
> --- a/drivers/mtd/cfi_flash.c
> +++ b/drivers/mtd/cfi_flash.c
> @@ -1231,9 +1231,26 @@ static int flash_detect_cfi (flash_info_t * info)
>  					debug ("port %d bits chip %d bits\n",
>  						info->portwidth << CFI_FLASH_SHIFT_WIDTH,
>  						info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
> -					/* this probably only works if info->interface == FLASH_CFI_X8X16 */
> -					info->addr_unlock1 = (info->portwidth == FLASH_CFI_8BIT) ? 0xAAA :
> 0x555;
> -					info->addr_unlock2 = (info->portwidth == FLASH_CFI_8BIT) ? 0x555 :
> 0x2AA;
> +
> +					/* calculate command offsets as in the Linux driver */
> +					info->addr_unlock1 = 0x555;
> +					info->addr_unlock2 = 0x2aa;
> +
> +					/*
> +					 * modify the unlock address if we are
> +					 * in compatibility mode
> +					 */
> +					if (	/* x8/x16 in x8 mode */
> +						((info->chipwidth == FLASH_CFI_BY8) &&
> +							(info->interface == FLASH_CFI_X8X16)) ||
> +						/* x16/x32 in x16 mode */
> +						((info->chipwidth == FLASH_CFI_BY16) &&
> +							(info->interface == FLASH_CFI_X16X32)))
> +					{
> +						info->addr_unlock1 = 0xaaa;
> +						info->addr_unlock2 = 0x555;
> +					}
> + 
>  					info->name = "CFI conformant";
>  					return 1;
>  				}
> diff --git a/include/flash.h b/include/flash.h
> index 6e252cc..2ed1e20 100644
> --- a/include/flash.h
> +++ b/include/flash.h
> @@ -80,6 +80,7 @@ typedef struct {
>  #define FLASH_CFI_X8		0x00
>  #define FLASH_CFI_X16		0x01
>  #define FLASH_CFI_X8X16		0x02
> +#define FLASH_CFI_X16X32	0x05
>  
>  /* convert between bit value and numeric value */
>  #define CFI_FLASH_SHIFT_WIDTH	3
> 
> -------------------------------------------------------------------------
> SF.Net email is sponsored by: 
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 
> 

-- 
View this message in context: http://www.nabble.com/-PATCH--CFI%3A-synchronize-command-offsets-with-Linux-CFI-driver-tp14273476p14451676.html
Sent from the Uboot - Users mailing list archive at Nabble.com.





More information about the U-Boot mailing list