[U-Boot-Users] [GIT PULL] AVR32 relocation (rebased)

[Haavard Skinnemoen]

Hi Wolfgang,

Please pull from the 'for-upstream' branch of 
 
	git://www.atmel.no/~hskinnemoen/u-boot/avr32 for-upstream

to receive the updates listed below.

This is basically the same pull request I sent a while ago rebased
against your latest git tree. It contains some major restructuring of
the avr32 code, ultimately resulting in it relocating itself to SDRAM
at startup.

There are also some changes to the clock- and portmux management code
in here, which was necessary because the old code used to keep some
state around in global variables. The new code provides mostly the
same functionality, is simpler and works without a writable data
section.

I've tested this on my own board for a couple of months now, and
everything seems to be fine. There are some unresolved issues with cfi
flash support, but this lot needs to go in before we can even think
about dropping the custom flash driver.

I'm not attaching any combined patch since it's quite big and has been
posted before:

http://groups.google.com/group/osdeve_mirror_boot-loaders_u-boot/browse_thread/thread/3cd6ae1384844f3/f9db0d0380f575df?lnk=gst

Haavard

 Makefile                                       |    2 +-
 avr32_config.mk                                |    2 +-
 board/atmel/atstk1000/atstk1000.c              |   17 +-
 board/atmel/atstk1000/flash.c                  |    2 +-
 board/atmel/atstk1000/u-boot.lds               |   21 +-
 cpu/at32ap/Makefile                            |    2 +-
 cpu/at32ap/at32ap7000/Makefile                 |    2 +-
 cpu/at32ap/at32ap7000/devices.c                |  448 ------------------------
 cpu/at32ap/at32ap7000/gpio.c                   |   77 ++++
 cpu/at32ap/at32ap7000/hebi.c                   |   38 --
 cpu/at32ap/cpu.c                               |   64 +++-
 cpu/at32ap/device.c                            |  126 -------
 cpu/at32ap/entry.S                             |    3 +-
 cpu/at32ap/exception.c                         |    7 +-
 cpu/at32ap/hsdramc.c                           |   43 +--
 cpu/at32ap/hsdramc1.h                          |    8 +-
 cpu/at32ap/hsmc3.h                             |    8 +-
 cpu/at32ap/interrupts.c                        |   14 +-
 cpu/at32ap/pio.c                               |   90 ++----
 cpu/at32ap/pio2.h                              |    8 +-
 cpu/at32ap/pm.c                                |  127 +-------
 cpu/at32ap/sm.h                                |    8 +-
 cpu/at32ap/start.S                             |  113 +++++--
 drivers/atmel_usart.c                          |   48 ++-
 drivers/atmel_usart.h                          |    8 +-
 include/asm-avr32/arch-at32ap7000/clk.h        |   58 +++
 include/asm-avr32/arch-at32ap7000/gpio.h       |  210 +++++++++++
 include/asm-avr32/arch-at32ap7000/hmatrix2.h   |    8 +-
 include/asm-avr32/arch-at32ap7000/memory-map.h |   81 +++--
 include/asm-avr32/arch-at32ap7000/platform.h   |  146 --------
 include/asm-avr32/global_data.h                |    4 +-
 include/asm-avr32/initcalls.h                  |    2 -
 include/configs/atstk1002.h                    |   17 +-
 lib_avr32/avr32_linux.c                        |    4 +-
 lib_avr32/board.c                              |  140 +++++++-
 35 files changed, 799 insertions(+), 1157 deletions(-)
 delete mode 100644 cpu/at32ap/at32ap7000/devices.c
 create mode 100644 cpu/at32ap/at32ap7000/gpio.c
 delete mode 100644 cpu/at32ap/at32ap7000/hebi.c
 delete mode 100644 cpu/at32ap/device.c
 create mode 100644 include/asm-avr32/arch-at32ap7000/clk.h
 create mode 100644 include/asm-avr32/arch-at32ap7000/gpio.h
 delete mode 100644 include/asm-avr32/arch-at32ap7000/platform.h

Haavard Skinnemoen (7):
      AVR32: Split start_u_boot into board_init_f and board_init_r
      AVR32: Use avr32-linux- cross-compilation prefix by default
      AVR32: Build position-independent u-boot
      AVR32: Clean up memory-map.h for at32ap7000
      AVR32: Resource management rewrite
      AVR32: Relocate u-boot to SDRAM
      AVR32: Use initdram() instead of board_init_memories()