[U-Boot-Users] [PATCH] Add support for the MPC8349E-mITX-GP

Timur Tabi timur at freescale.com
Fri Jan 26 05:41:47 CET 2007


Kim Phillips wrote:
> On Wed, 17 Jan 2007 09:09:45 -0600
> timur at freescale.com wrote:
> 
>> From: Timur Tabi <timur at freescale.com>
>>
>> Add support for the MPC8349E-mITX-GP, a stripped-down version of the
>> MPC8349E-mITX.
>>
>> Signed-off-by: Timur Tabi <timur at freescale.com>
>> ---
>>  MAINTAINERS                   |    1 +
>>  Makefile                      |   16 ++-
>>  board/mpc8349itx/config.mk    |    6 +-
>>  board/mpc8349itx/mpc8349itx.c |  105 ++--------
>>  include/configs/MPC8349ITX.h  |  463 ++++++++++++++++-------------------------
>>  include/mpc83xx.h             |   41 ++++
>  
> Timur, this looks good except new boards should at least have their own config file;
> I have a problem with multiple ifdef CONFIG_MPC8349ITX checks in MPC8349ITX.h.

The ITX and the ITX-GP are basically the same board, except the ITX has 
a few extra peripherals.  It doesn't make sense to have separate config 
files.

As for the ifdefs, there are only three - one that defines the CF card 
that only the ITX has, one for the flash sizes, and another for the 
command prompt.  I could technically move these into the Makefile, 
eliminating any ifdefs from the header file.  Do you want me to do that?

> Also, there are unrelated modifications in this patch - please respin.

Could you be more specific?  The cleanups to the header files and the 
source files are for the purpose of improving the ability of the same 
code to support two boards.





More information about the U-Boot mailing list