[U-Boot-Users] [PATCH] pciauto_setup_device bars_num fix

Ed Swarthout Ed.Swarthout at freescale.com
Wed Jul 25 08:28:53 CEST 2007


Passing bars_num=0 to pciauto_setup_device should assign no bars.

Signed-off-by: Ed Swarthout <Ed.Swarthout at freescale.com>
---
 drivers/pci_auto.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index a3c609b..2378553 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -94,7 +94,7 @@ void pciauto_setup_device(struct pci_controller *hose,
 	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
 	cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
 
-	for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
+	for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
 		/* Tickle the BAR and get the response */
 		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
 		pci_hose_read_config_dword(hose, dev, bar, &bar_response);
-- 
1.5.3.rc1.13.g08e38





More information about the U-Boot mailing list