[U-Boot-Users] u-boot on nadflash for at91sam9260ek

Stefan Roese sr at denx.de
Wed Jun 6 21:48:05 CEST 2007


On Wednesday 06 June 2007, Victor Librado wrote:
> I am using the same value for the SMC registers as stated in my linux
> kernel board-at91sam9260ek.c. In linux I can perform nandflash
> read/erase/write ok. (flash_eraseall / nandwrite commands).
>
> May I have to define the JFFS2 partitions in u-boot configuration
> my_board.h as I have in Linux?

No, this sounds like a driver problem. Do you use the old legancy NAND 
interface (CFG_NAND_LEGACY) with the old access macros (NAND_DISABLE_CE...), 
or do you use the new interface?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================




More information about the U-Boot mailing list