[U-Boot-Users] is it possible to program a DIGI connectme arm7 device with Macraigor JTAG raven cable with u-boot software

[Guglielmo Fanini]

I would like to read the 2mb flash of a DIGI connectme -S ARM7 TDMI (I
think it is at least) based embedded board and program it back, is it
possible Macraigor JTAG raven cable and u-boot software.
Which cpu should I specify of ARM7 : LIST_ARM7="B2 ep7312 evb4510 impa7
modnet50"
Are there any links to DIGI ARM7 and u-boot information anywhere ? thank
you.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070607/288706da/attachment.htm