[U-Boot-Users] Can a BDI2K be used with a bare/erased 834x based system?

[Timur Tabi]

Dan Malek wrote:
> 
> On Jun 15, 2007, at 2:13 PM, Timur Tabi wrote:
> 
>> Yes.  You use this feature to flash an RCW when the flash is trashed.
> 
> Technically, you don't "flash" an RCW, but rather
> provide one over the COP interface. :-) 

What I meant is that you can use the BDI's RCW override feature to allow the CPU to be 
configured.  Then you can configure the flash interface, and that will give you the 
ability to program flash.  Then you "flash an RCW" (i.e. program the flash address that 
contain the RCW with a valid RCW).

-- 
Timur Tabi
Linux Kernel Developer @ Freescale