[U-Boot-Users] Cannot assemble cpu/ppc4xx/start.S for sequoia

[Stefan Roese]

Hi Niklaus,

On Thursday 21 June 2007, Niklaus Giger wrote:
> After pulling the recent git merges from stefan I get the following error:
>
> ppc_4xx-gcc  -D__ASSEMBLY__ -g  -Os   -fPIC -ffixed-r14 -meabi
> -fno-strict-aliasing -D__KERNEL__ -DTEXT_BASE=0xFFFA0000
> -I/home/ng/u-boot/build.sequoia/include2
> -I/home/ng/u-boot/build.sequoia/include
> -I/home/ng/u-boot/u-boot.work/include -fno-builtin -ffreestanding -nostdinc
> -isystem /home/hcu/eldk-4.1/usr/bin/../lib/gcc/powerpc-linux/4.0.0/include
> -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_4xx -ffixed-r2 -ffixed-r29
> -mstring -msoft-float -Wa,-m405 -mcpu=405 -DCONFIG_440=1 -c -o

Hmmm. CONFIG_440 is set _and_ cpu=405. This is the source of the problem.

> /home/ng/u-boot/build.sequoia/cpu/ppc4xx/start.o start.S
> start.S: Assembler messages:
> start.S:1211: Error: Unrecognized opcode: `rfmci'

Is this a PPC405 based board or a PPC440 based board? Please include your 
board config file and I'll take a look at it.

As you may have noticed all 4xx boards (405 & 440) compile clean with ELDK4.0.

Viele Grüße,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================