[U-Boot-Users] Cannot assemble cpu/ppc4xx/start.S for sequoia
Rafal Jaworowski
raj at semihalf.com
Thu Jun 21 13:53:16 CEST 2007
Niklaus Giger wrote:
>
> After pulling the recent git merges from stefan I get the following error:
>
> ppc_4xx-gcc -D__ASSEMBLY__ -g -Os -fPIC -ffixed-r14 -meabi
> -fno-strict-aliasing -D__KERNEL__ -DTEXT_BASE=0xFFFA0000
> -I/home/ng/u-boot/build.sequoia/include2 -I/home/ng/u-boot/build.sequoia/include
> -I/home/ng/u-boot/u-boot.work/include -fno-builtin -ffreestanding -nostdinc
> -isystem /home/hcu/eldk-4.1/usr/bin/../lib/gcc/powerpc-linux/4.0.0/include -pipe
> -DCONFIG_PPC -D__powerpc__ -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring
> -msoft-float -Wa,-m405 -mcpu=405 -DCONFIG_440=1 -c -o
> /home/ng/u-boot/build.sequoia/cpu/ppc4xx/start.o start.S
> start.S: Assembler messages:
> start.S:1211: Error: Unrecognized opcode: `rfmci'
>
> I am using ppc_4xx-gcc --version
> ppc_4xx-gcc (GCC) 4.0.0 (DENX ELDK 4.1 4.0.0)
>
>
> Any hints would be appreciated.
>
Hi Niklaus,
Do you see any complaints about 'sed' not found? One thing that might be
going wrong is while checking for the 440 vs. 405.
The board config file is found (using sed...) to decide on the variant
-- see cpu/ppc4xx/config.mk. When the tool is not available the
config.mk would default to chosing 405 and likely lead to such problems.
kind regards,
Rafal
More information about the U-Boot
mailing list