[U-Boot-Users] problem with S29GL128N flash using cfi driver

[nicky geerts]

OK, it works with the old version 1.1.0

I'll look further into getting it to work with the new 1.2.0 version as well.

Thank you very much for your assistance :-)

Best regards,

Nicky Geerts

2007/6/27, nicky geerts <nicky.geerts.news at gmail.com>:
> yes, i'm aware of that.
>
> there used to be a 32MB on the board before, bet they replaced it with
> a 16MB flash, mirrored twice in the same range
>
> I changed my flash base to 0xFF000000, and I'm getting more success,
> I'll keep you posted when i've been able to diable these debug
> messages... ;-)
>
> Nicky
>
> 2007/6/27, Marc Leeman <marc.leeman at gmail.com>:
> > > it looks like the flash is mirrored in the memory map... just found
> > > this out with the hardware boys... looks like a downgrade from a
> > > previous 32MB flash...
> >
> > Last I checked, 128 Megabit is still 16 MB. If you want 32 MB, you'll
> > need the 256N.
> >
> > We use both on our boards.
> >
> > --
> >   greetz, marc
> > Don't think I'm going to miss you, any of you. I'm not. Well, maybe
> > a little bit.
> >         Rygel - Into the Lion's Den - Wolf in Sheep's Clothing
> > chiana 2.6.18-4-ixp4xx #1 Tue Mar 27 18:01:56 BST 2007 GNU/Linux
> >
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1.4.6 (GNU/Linux)
> >
> > iD8DBQFGglzSUQpj09NWLeERAr9vAJoCnqtZBSAy/ckxU5N07YDKIQ0NbgCeMZIu
> > 0C7gehtaiSWvTjuWyf/3FiU=
> > =ayZ+
> > -----END PGP SIGNATURE-----
> >
> >
>