[U-Boot-Users] Flash vs DataFlash vs NAND Flash

[Ulf Samuelsson]

Um... I wasn't aware that an earlier version of u-boot would have better
support than 1.2.0.

I'll check into it.

One of the reasons I wanted 1.2.0 was that it had NAND flash support for
very large NAND flash devices.

I'll check it out.

Matt

==> I think you should download the Atmel 1.1.5
        create a diff vs vanilla 1.1.5 and then reapply on top of 1.2.0
        This way, you make sure that you have the latest Atmel stuff
        AND the  latest generic stuff.



Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavallerivägen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57

Technical support when I am not available:
AT89 C51 Applications Group: mailto:micro.hotline at nto.atmel.com
AT90 AVR Applications Group: mailto:avr at atmel.com
AT91 ARM Applications Group: mailto:at91support at atmel.com
FPSLIC Application Group: mailto:fpslic at atmel.com Best AVR
link: www.avrfreaks.net