[U-Boot-Users] xilinx drivers

[mONStR]

Hi Stefan,

>Hi Michal,

>On Monday 26 March 2007 08:10, mONStR wrote:
>> I would like to add xilinx drivers xilinx_enet and xilinx_iic to drivers
>> (drivers/xilinx/xilinx_enet and xilinx_iic) folder
>
>I would prefer something like:
>
>drivers/net/xilinx_enet/*
>drivers/i2c/xilinx_iic/*

Yes, of course

>> and change ifdef label 
>> because I use this drivers for Microblaze processor and this drivers are
>> used for ppc405 embedded core like ml300.
>>
>> Label as #if defined(XPAR_EMAC_0_DEVICE_ID) is board dependent and I would
>> like to remove this define from config files for Microblaze boards.
>
>But please make sure, that this file is only included in the targets that 
>really need it.

OK.

>> and then clean Makefiles...
>>
>> CFLAGS   += -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
>>
>> OBJS	= $(BOARD).o \
>> 	  serial.o \
>> 	  ../xilinx_enet/emac_adapter.o  ../xilinx_enet/xemac.o \
>> 	  ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
>> 	  ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
>> 	  ../xilinx_enet/xemac_intr_dma.o ../xilinx_iic/iic_adapter.o \
>> 	  ../xilinx_iic/xiic_l.o ../common/xipif_v1_23_b.o \
>> 	  ../common/xbasic_types.o ../common/xdma_channel.o \
>> 	  ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
>> 	  ../common/xversion.o \
>
>You are talking about the current file "board/xilinx/ml300/Makefile", right?

Yes about current board/xilinx/ml300/Makefile and Makefile, which are only in u-boot-microblaze repository board/xilinx/xupv2p/Makefile and board/xilinx/ml401/Makefile.

>> Is it possible do this changes?
>
>Yes, this is possible to change. This could definitely needs some cleanup.

OK.

>Maybe Grant wants to add some remarks here? Grant?

I am waiting for Grant.

>> And after that add support for other xilinx peripherals as SPI, EMACLITE,
>> etc.
>>
>> Isn't it problem with Xilinx licence?
>
>I doesn't see to be. But I am not a lawyer.
 OK.

>Best regards,
>Stefan
>
>=====================================================================
>DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
>Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
>=====================================================================
>

Michal Simek