[U-Boot-Users] BDI2000 with ML403 board.

[Wolfgang Denk]

In message <406A31B117F2734987636D6CCC93EE3C0133FCE7 at ehost011-3.exch011.intermedia.net> you wrote:
> 
> Does anybody have ML403 configuration file another than that on ultsol
> site (attached)? And what about registers' definition file for ppc405?

What's wrong with that file?

The register definitions file is on the floppy disk with the BDI2000
firmware...

> With .cfg file I took from ultsol site I cannot step through code and
> get break points (I'm running u-boot now). It also complains upon reboot
> though eventually succeeds:
> 
> CONFIG: loading configuration file passed
> - TARGET: processing user reset request
> - TARGET: resetting target passed
> - TARGET: processing target startup ....
> - TARGET: core #0 PVR is 0x20011470
> *** INIT: #0 WSPR 954 0x00000000 failed
> # PPC: JTAG instruction stuff overrun

You seem to have JTAG communication problems...

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I know engineers. They love to change things.             - Dr. McCoy