[U-Boot-Users] BDI2000 with ML403 board.

[Leonid]

On Thursday, March 29, 2007 4:10 PM Wolfgang Denk wrote:
> The register definitions file is on the floppy disk with the BDI2000
> firmware...

Yes, I've found it.

> > With .cfg file I took from ultsol site I cannot step through code
and
> > get break points (I'm running u-boot now). It also complains upon
reboot
> > though eventually succeeds:
> > 
> > CONFIG: loading configuration file passed
> > - TARGET: processing user reset request
> > - TARGET: resetting target passed
> > - TARGET: processing target startup ....
> > - TARGET: core #0 PVR is 0x20011470
> > *** INIT: #0 WSPR 954 0x00000000 failed
> > # PPC: JTAG instruction stuff overrun

> You seem to have JTAG communication problems...

No doubt. The trick is to find correct combination of EDK project, BDI
config file and u-boot/kernel projects to make entire thing work. And
also cable we've prepared could be bad...

Best regards,

Leonid.