[U-Boot-Users] what's the problem?

[MPE Visitor MPEV4]

Hi everyone,

I'm working on a mx21ads like board and have ported u-boot-1.1.4 to it.

When I boot my linux 2.4.20 on it, it seems not working so better. The
messages are as below 1. 

Firstly, I think my initialize is not complete, but the older bootloader
run in my u-boot

Without initialize (I recommend all code, just remain the boot kernel
code) can boot the 

Same linux kernel yet! The messages are as below 2.

So, what's the problem?

Thanks

Joe

1.

<Information from my termitate>

Filename 'image.bootm'.

Load address: 0xc3000000

Loading:
#################################################################

 
#################################################################

         ###########################################################

done

Bytes transferred = 966136 (ebdf8 hex)

# bootm c3000000

## Booting image at c3000000 ...

   Image Name:   image

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    966072 Bytes = 943.4 kB

   Load Address: c0008000

   Entry Point:  c0008000

   Verifying Checksum ... OK

OK

 

Starting kernel ...

 

Uncompressing
Linux.............................................................

.... done, booting the kernel.

2. 

# tftp c3000000 bootloader.bin

TFTP from server 172.20.40.68; our IP address is 172.20.40.69

Filename 'bootloader.bin'.

Load address: 0xc3000000

Loading: ##########

done

Bytes transferred = 46656 (b640 hex)

# go c3000400

DBMX21 Linux Bootloader ver mx21_to2_rel_beta_1.0

Copyright (C) 2003 Freescale Semiconductors Suzhou Ltd.

 

root=/dev/mtdblock/2 rw mem=64M

 

MPLL = 266, FCLK = 266, BCLK = 133

Press any key for alternate boot-up options ... 07

Copying kernel from Flash to RAM ...

Booting kernel ...

 

Uncompressing
Linux.............................................................

.... done, booting the kernel.

Starting kernel.............

Linux version 2.4.20-mx2bsp, BSP version mx21_to3_rel_3.2 -
(root at localhost.loca

ldomain) (gcc version 3.2.3) #122 Fri Mar 24 01:58:09 ACT 2006

Processor: ARM ARM926EJ-Ssid(wb) revision 4

Architecture: Freescale MX2ADS

root=/dev/mtdblock/2 rw mem=64M

 

MPLL = 266, FCLK = 266, BCLK = 133

Press any key for alternate boot-up options ... 00

 

Copying kernel from Flash to RAM ...

Booting kernel ...

 

Uncompressing
Linux.............................................................

.... done, booting the kernel.

Starting kernel.............

Linux version 2.4.20-mx2bsp, BSP version mx21_to3_rel_3.2 -
(root at localhost.loca

ldomain) (gcc version 3.2.3) #122 Fri Mar 24 01:58:09 ACT 2006

Processor: ARM ARM926EJ-Ssid(wb) revision 4

Architecture: Freescale MX2ADS

Command line is :root=/dev/mtdblock/2 rw mem=64M

On node 0 totalpages: 16384

zone(0): 16384 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock/2 rw mem=64M

Console: colour dummy device 80x30

Calibrating delay loop...

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070527/24506555/attachment.htm