[U-Boot-Users] [PATCH] mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid

[Kim Phillips]

u-boot itself uses GMII mode on the 8360.  Fix up UCC phy-connection-type
properties in the device tree so the PHY gets configured for internal delay on
RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.

Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
---
 board/freescale/mpc8360emds/mpc8360emds.c |   31 +++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index e050cd4..5918740 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -295,6 +295,7 @@ void sdram_init(void)
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
+	const immap_t *immr = (immap_t *)CFG_IMMR;
 #if defined(CONFIG_OF_FLAT_TREE)
 	u32 *p;
 	int len;
@@ -309,5 +310,35 @@ void ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
 #endif
+	/*
+	 * mpc8360ea pb mds errata 2: RGMII timing
+	 * if on mpc8360ea rev. 2.1,
+	 * change both ucc phy-connection-types from rgmii-id to rgmii-rxid
+	 */
+	if (immr->sysconf.spridr == SPR_8360_REV21 ||
+	    immr->sysconf.spridr == SPR_8360E_REV21) {
+		int nodeoffset;
+		void *prop;
+
+		/* fixup UCC 1 if using rgmii-id mode */
+		nodeoffset = fdt_find_node_by_path(blob, "/" OF_QE "/ucc at 2000");
+		if (nodeoffset >= 0) {
+			prop = fdt_getprop(blob, nodeoffset,
+					        "phy-connection-type", 0);
+			if (prop && (strcmp(prop, "rgmii-id") == 0))
+				fdt_setprop(blob, nodeoffset, "phy-connection-type",
+					    "rgmii-rxid", sizeof("rgmii-rxid"));
+		}
+
+		/* fixup UCC 2 if using rgmii-id mode */
+		nodeoffset = fdt_find_node_by_path(blob, "/" OF_QE "/ucc at 3000");
+		if (nodeoffset >= 0) {
+			prop = fdt_getprop(blob, nodeoffset,
+					        "phy-connection-type", 0);
+			if (prop && (strcmp(prop, "rgmii-id") == 0))
+				fdt_setprop(blob, nodeoffset, "phy-connection-type",
+					    "rgmii-rxid", sizeof("rgmii-rxid"));
+		}
+	}
 }
 #endif
-- 
1.5.2.2