[U-Boot-Users] MPC83xx Ethernet bug

[Joakim Tjernlund]

Just tried to move my 83xx based board to latest u-boot and
noticed an old problem. u-boot tries to bring up the
ethernet at startup, not the first time it is used:

U-Boot 1.3.0-rc3-g992742a5-dirty (Nov 19 2007 - 16:45:18) 

Reset Status: External/Internal Soft, External/Internal Hard

CPU:   e300c2, MPC8323E, Rev: 10 at 266.664 MHz, CSB:  133 MHz
Board: Transmode CU
I2C reset sequence.
I2C:   ready
DRAM:  
   DDR RAM: 256 MB
FLASH: 128 MB
In:    serial
Out:   serial
Err:   serial
Net:   read wrong value : mii_id 3,mii_reg 2, base e0102320
read wrong value : mii_id 3,mii_reg 3, base e0102320
UEC: PHY is Generic MII (ffffffff)
read wrong value : mii_id 3,mii_reg 1, base e0102320
read wrong value : mii_id 3,mii_reg 5, base e0102320
FSL UEC0: Full Duplex
FSL UEC0: Speed 100BT
FSL UEC0: Link is up
read wrong value : mii_id 4,mii_reg 2, base e0103320
read wrong value : mii_id 4,mii_reg 3, base e0103320
UEC: PHY is Generic MII (ffffffff)
read wrong value : mii_id 4,mii_reg 1, base e0103320
read wrong value : mii_id 4,mii_reg 1, base e0103320
read wrong value : mii_id 4,mii_reg 5, base e0103320
FSL UEC1: Full Duplex
FSL UEC1: Speed 100BT
FSL UEC1: Link is up
FSL UEC0, FSL UEC1
read wrong value : mii_id 3,mii_reg 1, base e0102320

=>