[U-Boot-Users] Problems with usb storage devices on MPC5200 / TQM5200

[Martin Krause]

wd at denx.de wrote on Monday, November 19, 2007 4:54 PM:
> In message
> <47F3F98010FF784EBEE6526EAAB078D1024F87DE at tq-mailsrv.tq-net.de> you
> wrote:  
> > 
> > I have to admit, that I never tested the TQM5200 (nor any other
> > MPC5200 board) with the generic OHCI driver before. So I could not
> > tell, if it worked ever with the generic driver.
> 
> We tested it, of course - with the hardware that is available to us.
> 
> Which means on pre-Rev. B CPU only. [I wish TQ would finally
> understand what it means NOT to provide current hardware.]
> 
> > For the test with the current U-Boot I used three different memory
> > sticks, which always worked with the old cpu specific OHCI driver.
> > None of it worked with the generic driver :(.
> 
> I guess you use Rev. B silicon? Could you please try it on an old
> board?

I think I tested it on both versions. But I'm not sure. I will
repeat the test on an old board.

Best Regards,
Martin Krause