[U-Boot-Users] MPC83xx Ethernet bug
Liu Dave
DaveLiu at freescale.com
Tue Nov 20 06:29:40 CET 2007
Hello Joakim,
I did the test u-boot-1.3.0 wolfgang just released on mpc832xemds
board, I did not see the issue that you said.
U-Boot 1.3.0 (Nov 20 2007 - 13:30:24) MPC83XX
Reset Status:
CPU: e300c2, MPC8323E, Rev: 10 at 264 MHz, CSB: 132 MHz
Board: Freescale MPC832XEMDS
I2C: ready
DRAM: 128 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Net: UEC: PHY is Davicom DM9161A (181b8a0)
FSL UEC0: Full Duplex
FSL UEC0: Speed 100BT
FSL UEC0: Link is up
UEC: PHY is Davicom DM9161A (181b8a0)
FSL UEC0, FSL UEC1
Hit any key to stop autoboot: 0
=> ping 10.193.20.133
Using FSL UEC0 device
host 10.193.20.133 is alive
=>
Thanks,
Dave
> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf
> Of Joakim Tjernlund
> Sent: 2007?11?19? 11:51 PM
> To: U-BOOT
> Subject: [U-Boot-Users] MPC83xx Ethernet bug
>
> Just tried to move my 83xx based board to latest u-boot and
> noticed an old problem. u-boot tries to bring up the
> ethernet at startup, not the first time it is used:
>
> U-Boot 1.3.0-rc3-g992742a5-dirty (Nov 19 2007 - 16:45:18)
>
> Reset Status: External/Internal Soft, External/Internal Hard
>
> CPU: e300c2, MPC8323E, Rev: 10 at 266.664 MHz, CSB: 133 MHz
> Board: Transmode CU
> I2C reset sequence.
> I2C: ready
> DRAM:
> DDR RAM: 256 MB
> FLASH: 128 MB
> In: serial
> Out: serial
> Err: serial
> Net: read wrong value : mii_id 3,mii_reg 2, base e0102320
> read wrong value : mii_id 3,mii_reg 3, base e0102320
> UEC: PHY is Generic MII (ffffffff)
> read wrong value : mii_id 3,mii_reg 1, base e0102320
> read wrong value : mii_id 3,mii_reg 5, base e0102320
> FSL UEC0: Full Duplex
> FSL UEC0: Speed 100BT
> FSL UEC0: Link is up
> read wrong value : mii_id 4,mii_reg 2, base e0103320
> read wrong value : mii_id 4,mii_reg 3, base e0103320
> UEC: PHY is Generic MII (ffffffff)
> read wrong value : mii_id 4,mii_reg 1, base e0103320
> read wrong value : mii_id 4,mii_reg 1, base e0103320
> read wrong value : mii_id 4,mii_reg 5, base e0103320
> FSL UEC1: Full Duplex
> FSL UEC1: Speed 100BT
> FSL UEC1: Link is up
> FSL UEC0, FSL UEC1
> read wrong value : mii_id 3,mii_reg 1, base e0102320
>
> =>
>
> --------------------------------------------------------------
> -----------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
More information about the U-Boot
mailing list