[U-Boot-Users] boot up u-boot from RAM

[lamej]

Hi lee,
I am using lite5200 and Ihave dowaload uboot IT was working perfect, but I
got the usb tap and the Code warrior.
my problems are :
USB tab does not comminicate with the board .
and I donot know if uboot goes with code warrior
thanks

Nghiem, Tien wrote:
> 
> Lei,
> 
> You have to rebuild your code to put your code in the RAM area (other than
> the FLASH area). Don't use the address 0x00-0x2fff because its reserved
> for the exception vectors usually. I have a Lite5200 EVB. I use the
> address 0x20000 to put my u-boot in RAM and it works. I don't know if it
> could be done for the mpc8270.
> 
> Tien
> 
> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net
> [mailto:u-boot-users-bounces at lists.sourceforge.net]On Behalf Of Lei Sun
> Sent: Thursday, October 26, 2006 4:15 PM
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] boot up u-boot from RAM
> 
> 
> Hi all:
>    I am debugging a costomized board based on mpc8270, due to the
> design flaw, we can't boot up the system using flash, so I was trying
> to debug u-boot by loading it into the RAM.
>   I used JTAG debugger to initialize the SDRAM and load the u-boot to
> 0x0, after reset, the PC is at 0x100. the disassembled code looks
> correct on that location, however, i can't single step start from
> 0x100. Is that because 0x100 is the reset vector ? I tried to put some
> breakpoint at some places not far from start point, but it gave me
> "unknown halt at 0x00000000" error after "run" command. after that the
> memory seems corrupted.
>   Too bad I was using a bad debugger(Guardian-SE),  I have a
> evaluation copy of the codewarrior plus USB+TAP from freescale. I
> tried that on our PQ2FADS-VR SDK. After reset, and CPU halt, I can't
> see any disassembed code on 0x100 (the uboot is already in the flash,
> and I assume it should read data from CS0 upon reset). Although the
> code does execute after hitting "run" button.  I wonder why can't I
> see the disassembed code after reset?
> 
> Thanks
> lei
> 
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 
> 

-- 
View this message in context: http://www.nabble.com/boot-up-u-boot-from-RAM-tf2516529.html#a13948771
Sent from the Uboot - Users mailing list archive at Nabble.com.