[U-Boot-Users] I2C scanning

[Yasothabalan Ramaswamy-TLS,Chennai]

Hi all,

 

I am using MPC5200B CPU. 

 

I am using both the I2C buses present as defined below,

 

#define MPC5XXX_I2C1              (CFG_MBAR + 0x3D00)

#define MPC5XXX_I2C2              (CFG_MBAR + 0x3D40)

 

Is it possible to scan both the buses in the run time and do read/write
operation?

 

I am here able to scan only one bus. 

 

How can I fix this issue? 

 

 

Regards,

Yasotha Balan R

 



DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have 
received this email in error please delete it and notify the sender immediately. Before opening any mail and 
attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071022/5569769e/attachment.htm