[U-Boot-Users] [PATCH] MPC8568E-MDS: set up QE pario for UART1

[Anton Vorontsov]

To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
be set up appropriately.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 board/mpc8568mds/mpc8568mds.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c
index 2b3f44f..ff04ddc 100644
--- a/board/mpc8568mds/mpc8568mds.c
+++ b/board/mpc8568mds/mpc8568mds.c
@@ -84,6 +84,13 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{1, 31, 2, 0, 3}, /* GTX125 */
 	{4,  6, 3, 0, 2}, /* MDIO */
 	{4,  5, 1, 0, 2}, /* MDC */
+
+	/* UART1 */
+	{2, 0, 1, 0, 2}, /* UART_SOUT1 */
+	{2, 1, 1, 0, 2}, /* UART_RTS1 */
+	{2, 2, 2, 0, 2}, /* UART_CTS1 */
+	{2, 3, 2, 0, 2}, /* UART_SIN1 */
+
 	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
 };
 
-- 
1.5.0.6