[U-Boot-Users] R: Booting with attached BDI but not alone (onlyICTRL remained in BDI cfg)

[DI BACCO ANTONIO - technolabs]

> Is there any chance that the board is broken? I think I connected a wiggler to the BDM port in the > wrong position for only a while. But why should it boot with attached BDI if is it broken?

I discovered that when the board is powered on, if I try to connect BDI connector trying to touch only pin 1 and 2 (vfls0 and sreset) the board starts. I suspect that bdi pulls up the sreset in some way. 

Bye.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070912/8c300dba/attachment.htm