[U-Boot-Users] [PATCH 3/3] Apollon BSP support

[Kyungmin Park]

>
> > +
> > +#define CONFIG_EXTRA_ENV_SETTINGS                                    \
> > +     "Image=tftp 0x80008000 Image\; go 0x80008000\0"                 \
> > +     "zImage=tftp 0x80180000 zImage\; go 0x80180000\0"               \
> > +     "uImage=tftp 0x80180000 uImage\; bootm 0x80180000\0"            \
> > +     "uboot=tftp 0x80008000 u-boot.bin\; go 0x80008000\0"            \
> > +     "xloader=tftp 0x80180000 x-load.bin\; cp.w 0x80180000 0x00000400 0x1000\; go 0x00000400\0"      \
>
> Maximum line length exceeded.

I will rearrange it as coding style.

>
> > +     "syncmode50=mw.w 0x1e442 0xc0c4\; mw 0x6800a060 0xe30d1201\0"   \
> > +     "syncmode=mw.w 0x1e442 0xe0f4\; mw 0x6800a060 0xe30d1201\0"     \
> > +     "norboot=cp32 0x18040000 0x80008000 0x200000\; go 0x80008000\0" \
> > +     "oneboot=onenand read 0x80008000 0x40000 0x200000\; go 0x80008000\0"\
> > +     "onesyncboot=run syncmode oneboot\0"                            \
> > +     "bootcmd=run uboot\0"
>
> Please remove the bogus backslash-escapes for the semicolons h.
>
> Please note that booting a Linux kernel using the "go" command is
> not a good idea. I would not add this to a default environment.
>

For fast boot, we will use the uncompressed kernel and jump to kernel directly
Yes I know it not common method. I can't pass any kernel parameters
But it's used for internal use only.

If you don't mind I want to leave it as it was

Thank you,
Kyungmin Park