[U-Boot-Users] [PATCH 2/2] add MPC8343 based board mvBlueLYNX-M7 aka mvblm7
André Schwarz
Andre.Schwarz at matrix-vision.de
Fri Apr 11 22:04:29 CEST 2008
Kim,
2nd part of the mvblm7 board patch.
Cheers,
André
Signed-off-by: Andre Schwarz <andre.schwarz at matrix-vision.de>
--
diff --git a/board/mvblm7/mvblm7_autoscript b/board/mvblm7/mvblm7_autoscript
new file mode 100644
index 0000000..8ebb4ca
--- /dev/null
+++ b/board/mvblm7/mvblm7_autoscript
@@ -0,0 +1,38 @@
+echo
+echo "==== running autoscript ===="
+echo
+setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram}
\${mv_dtb_addr_ram}
+setenv ramkernel setenv kernel_boot \${mv_kernel_addr_ram}
+setenv flashkernel setenv kernel_boot \${mv_kernel_addr}
+setenv cpinitrd cp \${mv_initrd_addr} \${mv_initrd_addr_ram}
\${mv_initrd_length}
+setenv bootfromflash run flashkernel cpinitrd ramparam
+setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name}
+setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000
+setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup\;fdt print
+setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run
ramkernel
+setenv addcons setenv bootargs \${bootargs}
console=ttyS\${console_nr},\${baudrate}N8
+setenv set_static_ip setenv ipaddr \${static_ipaddr}
+setenv set_static_nm setenv netmask \${static_netmask}
+setenv set_static_gw setenv gatewayip \${static_gateway}
+setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask}
+setenv ramparam setenv bootargs root=/dev/ram ro rootfstype=squashfs
+if test ${autoscr_boot} != no;
+then
+ if test ${netboot} = yes;
+ then
+ bootp
+ if test $? = 0;
+ then
+ echo "=== bootp succeeded -> netboot ==="
+ run set_ip
+ run getdtb rundtb bootfromnet ramparam bootdtb
+ else
+ echo "=== netboot failed ==="
+ fi
+ fi
+ run set_static_ip set_static_nm set_static_gw set_ip
+ echo "=== bootfromflash ==="
+ run cpdtb rundtb bootfromflash
+else
+ echo "=== boot stopped with autoscr_boot no ==="
+fi
diff --git a/board/mvblm7/pci.c b/board/mvblm7/pci.c
new file mode 100644
index 0000000..25e4c6f
--- /dev/null
+++ b/board/mvblm7/pci.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * (C) Copyright 2008
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz at matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+#include <pci.h>
+#include <mpc83xx.h>
+#include "mvblm7.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+
+#define SLOT0_IRQ 3
+#define SLOT1_IRQ 4
+void pci_mvblm7_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char line = 0xff;
+
+ if (PCI_BUS(dev) == 0) {
+ switch (PCI_DEV(dev)) {
+ case 0x0:
+ return;
+ case 0xb:
+ line = 0;
+ break;
+ case 0xc:
+ line = 1;
+ break;
+ default:
+ printf("***pci_scan: illegal dev = 0x%08x\n",
+ PCI_DEV(dev));
+ line = 0xff;
+ break;
+ }
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, line);
+ }
+}
+
+static struct pci_controller pci_hose = {
+ fixup_irq:pci_mvblm7_fixup_irq
+};
+
+int mvblm7_load_fpga(void)
+{
+ size_t data_size = 0;
+ void *fpga_data = NULL;
+ char *datastr = getenv("fpgadata");
+ char *sizestr = getenv("fpgadatasize");
+
+ if (datastr)
+ fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
+ if (sizestr)
+ data_size = (size_t)simple_strtoul(sizestr, NULL, 16);
+
+ return fpga_load(0, fpga_data, data_size);
+}
+
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CFG_PCI1_MEM_BASE,
+ phys_start: CFG_PCI1_MEM_PHYS,
+ size: CFG_PCI1_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CFG_PCI1_MMIO_BASE,
+ phys_start: CFG_PCI1_MMIO_PHYS,
+ size: CFG_PCI1_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CFG_PCI1_IO_BASE,
+ phys_start: CFG_PCI1_IO_PHYS,
+ size: CFG_PCI1_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ char *s;
+ int warmboot;
+ volatile immap_t *immr;
+ volatile gpio83xx_t *gpio;
+ volatile clk83xx_t *clk;
+ volatile law83xx_t *pci_law;
+ struct pci_region *reg[] = { pci_regions };
+
+ immr = (immap_t *) CFG_IMMR;
+ clk = (clk83xx_t *) & immr->clk;
+ pci_law = immr->sysconf.pcilaw;
+ gpio = (volatile gpio83xx_t *)&immr->gpio[0];
+
+ gpio->dat = MV_GPIO_DAT;
+ gpio->odr = MV_GPIO_ODE;
+ gpio->dir = MV_GPIO_OUT;
+
+#if defined(CONFIG_FPGA)
+ mvblm7_init_fpga();
+ s = getenv("skip_fpga");
+ if (!s || *s == '0')
+ mvblm7_load_fpga();
+#endif
+
+ /* Enable PCI_CLK_OUTPUTs 0 and 1 */
+ clk->occr |= 0xc0000000;
+
+ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
+
+ mpc83xx_pci_init(1, reg, warmboot);
+}
diff --git a/doc/README.mvblm7 b/doc/README.mvblm7
new file mode 100644
index 0000000..358a189
--- /dev/null
+++ b/doc/README.mvblm7
@@ -0,0 +1,84 @@
+Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
+-------------------------------------
+
+1. Board Description
+
+ The mvBL-M7 is a 120x120mm single board computing platform
+ with strong focus on stereo image processing applications.
+
+ Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
+ on any port (requires add-on board).
+
+2 System Components
+
+2.1 CPU
+ Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
+ 512MByte DDR-II memory @ 133MHz.
+ 8 MByte Nor Flash on local bus.
+ 2 Vitesse VSC8601 RGMII ethernet Phys.
+ 1 USB host controller over ULPI I/F.
+ 2 serial ports. Console running on ttyS0 @ 115200 8N1.
+ 1 SD-Card slot connected to SPI.
+ System configuration (HRCW) is taken from I2C EEPROM.
+
+2.2 PCI
+ A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.
+
+2.3 FPGA
+ Altera Cyclone-II EP2C20/35 with PCI DMA engines.
+ Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
+ Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.
+
+2.3.1 I/O @ FPGA
+ 2x8 Outputs : Infineon High-Side Switches to Main Supply.
+ 2x8 Inputs : Programmable input threshold + trigger capabilities
+ 2 dedicated flash interfaces for illuminator boards.
+ Cross trigger for chaining several boards.
+
+2.4 I2C
+ Bus1:
+ MAX5381 DAC @ 0x60 for 1st digital input threshold.
+ LM75 @ 0x90 for temperature monitoring.
+ EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
+ 1st image sensor interface (slave adresses depend on sensor type)
+ Bus2:
+ MAX5381 DAC @ 0x60 for 2nd digital input threshold.
+ 2nd image sensor interface (slave adresses depend on sensor type)
+
+3 Flash layout.
+
+ reset vector is 0xFFF00100, i.e. "HIGHBOOT".
+
+ FF800000 environment
+ FF802000 redundant environment
+ FF804000 u-boot script image
+ FF806000 redundant u-boot script image
+ FF808000 device tree blob
+ FF80A000 redundant device tree blob
+ FF80C000 tbd.
+ FF80E000 tbd.
+ FF810000 kernel
+ FFC00000 root FS
+ FFF00000 u-boot
+ FFF80000 FPGA raw bit file
+
+ mtd partitions are propagated to linux kernel via device tree blob.
+
+4 Booting
+
+ On startup the bootscript @ FF804000 is executed. This script be
exchanged
+ easily. Default boot mode is "boot from flash", i.e. system works
stand-alone.
+
+ This behaviour depends on some environment variables :
+
+ "netboot" : yes ->try dhcp/bootp and boot from network.A
+ "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
DHCP server
+ configuration, e.g. to provide different images to different devicices.
+
+ During netboot the system tries to get 3 image files:
+ 1. Kernel - name + data is given during BOOTP.
+ 2. Initrd - name is stored in "initrd_name"
+ 3. device tree blob - name is stored in "dtb_name"
+ Fallback are ther flash versions.
+
+ "console_nr" (0 or 1) defines the ttyS? that will be given to the
kernel.
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
new file mode 100644
index 0000000..8a46929
--- /dev/null
+++ b/include/configs/MVBLM7.h
@@ -0,0 +1,474 @@
+/*
+ * Copyright (C) Matrix Vision GmbH 2008
+ *
+ * based on Freescale's MPC8349ITX.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define MV_VERSION "v1.0.0"
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1
+#define CONFIG_MPC83XX 1
+#define CONFIG_MPC834X 1
+#define CONFIG_MPC8343 1
+
+#define CFG_IMMR 0xE0000000
+
+#define CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI
+#define CONFIG_PCI_SKIP_HOST_BRIDGE
+#define CONFIG_HARD_I2C
+#define CONFIG_TSEC_ENET
+#define CONFIG_MPC8XXX_SPI
+#define CONFIG_HARD_SPI
+
+/* I2C */
+#undef CONFIG_SOFT_I2C
+
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+#define CFG_I2C_SPEED 100000
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_83XX_DDR_USES_CS0 1
+#define CFG_MEMTEST_START 0x100000
+#define CFG_MEMTEST_END 0x800000
+
+#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
+ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+
+/* System has 512MB - will be fixed as soon as kernel crash resolved */
+#define CFG_DDR_SIZE 256
+
+/* HC, 75Ohm, DDR-II, DRQ */
+#define CFG_DDRCDR 0x80000001
+/* EN, ODT_WR, 3BA, 14row, 10col */
+#define CFG_DDR_CS0_CONFIG 0x80014202
+#define CFG_DDR_CS1_CONFIG 0x0
+#define CFG_DDR_CS2_CONFIG 0x0
+#define CFG_DDR_CS3_CONFIG 0x0
+
+/* 512MByte */
+#define CFG_DDR_CS0_BNDS 0x0000000f
+#define CFG_DDR_CS1_BNDS 0x0
+#define CFG_DDR_CS2_BNDS 0x0
+#define CFG_DDR_CS3_BNDS 0x0
+
+#define CFG_DDR_CLK_CNTL 0x02000000
+
+#define CFG_DDR_TIMING_0 0x00260802
+#define CFG_DDR_TIMING_1 0x2625b221
+#define CFG_DDR_TIMING_2 0x1f9820c7
+#define CFG_DDR_TIMING_3 0x00000000
+
+/* ~MEM_EN, SREN, DDR-II, 32_BE */
+#define CFG_DDR_SDRAM_CFG 0x43080000
+#define CFG_DDR_SDRAM_CFG2 0x00401000
+#define CFG_DDR_INTERVAL 0x04060100
+
+#define CFG_DDR_MODE 0x078e0232
+
+/* Flash */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CFG_FLASH_BASE 0xFF800000
+#define CFG_FLASH_SIZE 8
+#define CFG_FLASH_SIZE_SHIFT 3
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_ERASE_TOUT 60000
+#define CFG_FLASH_WRITE_TOUT 500
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 256
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V)
+#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) |
OR_UPM_XAM | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS|\
+ OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \
+ OR_GPCM_EAD)
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE
+#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT))
+
+/*
+ * U-Boot memory configuration
+ */
+#define CFG_MONITOR_BASE TEXT_BASE
+#undef CFG_RAMBOOT
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+#define CFG_MONITOR_LEN (512 * 1024)
+#define CFG_MALLOC_LEN (512 * 1024)
+
+/*
+ * Local Bus LCRR and LBCR regs
+ * LCRR: DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR 0x00000000
+
+/* LB sdram refresh timer, about 6us */
+#define CFG_LBC_LSRT 0x32000000
+/* LB refresh timer prescal, 266MHz/32*/
+#define CFG_LBC_MRTPR 0x20000000
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CONFIG_CONSOLE ttyS0
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+#define MV_DTB_NAME "mvblm7.dtb"
+
+/*
+ * PCI
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x10000000
+#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
+#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE 0x10000000
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xE2000000
+#define CFG_PCI1_IO_SIZE 0x01000000
+
+#define _IO_BASE 0x00000000
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 3
+#define CONFIG_PCI_PNP
+
+#define CONFIG_PCI_SCAN_SHOW
+
+#define PCI_66M
+#define CONFIG_83XX_CLKIN 66666666 /* in Hz */
+
+/* TSEC */
+#define CONFIG_GMII
+#define CFG_VSC8601_SKEWFIX
+
+#define CONFIG_TSEC1
+#define CONFIG_TSEC2
+
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR B6:B4:45:EB:FB:C0
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_FEC1_PHY_NORXERR
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
+#define TSEC1_PHY_ADDR 0x10
+#define TSEC1_PHYIDX 0
+#define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
+
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR B6:B4:45:EB:FB:C2
+#define CONFIG_TSEC2_NAME "TSEC1"
+#define CONFIG_FEC2_PHY_NORXERR
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+#define TSEC2_PHY_ADDR 0x11
+#define TSEC2_PHYIDX 0
+#define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
+
+#define CONFIG_ETHPRIME "TSEC0"
+
+#define CONFIG_BOOTP_VENDOREX
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_RANDOM_DELAY
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+/*
+ * Environment
+ */
+#undef CFG_FLASH_PROTECTION
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0xFF800000
+#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_SECT_SIZE 0x2000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+
+#define CONFIG_LOADS_ECHO
+#define CFG_LOADS_BAUD_CHANGE
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_FPGA
+
+#undef CONFIG_WATCHDOG
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_LOADADDR 200000 /* default location for tftp
and bootm */
+
+#define CFG_PROMPT "mvBL-M7> "
+#define CFG_CBSIZE 256
+
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE CFG_CBSIZE
+#define CFG_HZ 1000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+#define CFG_HRCW_LOW 0x0
+#define CFG_HRCW_HIGH 0x0
+
+/*
+ * System performance
+ */
+#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on
TSEC 1 */
+#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1)
+
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+#define CFG_HID2 HID2_HBE
+
+/* DDR */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#if CFG_DDR_SIZE==512
+#define CFG_IBAT7L ((CFG_SDRAM_BASE + (256<<20)) | BATL_PP_10 |
BATL_MEMCOHERENCE)
+#define CFG_IBAT7U ((CFG_SDRAM_BASE + (256<<20)) | BATU_BL_256M |
BATU_VS | BATU_VP)
+#elif CFG_DDR_SIZE==256
+#define CFG_IBAT7L 0
+#define CFG_IBAT7U 0
+#else
+#error only CFG_DDR_SIZE 256/512 supported
+#endif
+
+/* PCI */
+#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS |
BATU_VP)
+#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 |
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS |
BATU_VP)
+
+/* no PCI2 */
+#define CFG_IBAT3L 0
+#define CFG_IBAT3U 0
+#define CFG_IBAT4L 0
+#define CFG_IBAT4U 0
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT |
BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
+#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_NETDEV eth0
+
+/* Default path and filenames */
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "s"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_RESET_TO_RETRY 1000
+
+#define MV_CI "mvBlueLYNX-M7"
+#define MV_VCI "mvBlueLYNX-M7"
+#define MV_FPGA_DATA "0xfff80000"
+#define MV_FPGA_SIZE "0x76ca2"
+#define MV_KERNEL_ADDR "0xff810000"
+#define MV_INITRD_ADDR "0xffc00000"
+#define MV_AUTOSCR_ADDR "0xff804000"
+#define MV_AUTOSCR_ADDR2 "0xff806000"
+#define MV_DTB_ADDR "0xff808000"
+#define MV_INITRD_LENGTH "0x00300000"
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
+#define MV_KERNEL_ADDR_RAM "0x00100000"
+#define MV_DTB_ADDR_RAM "0x00600000"
+#define MV_INITRD_ADDR_RAM "0x01000000"
+
+#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; then autoscr
${autoscr_addr}; else autoscr ${autoscr_addr2}; fi;"
+#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console_nr=0\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0" \
+ "fpga=0\0" \
+ "fpgadata=" MV_FPGA_DATA "\0" \
+ "fpgadatasize=" MV_FPGA_SIZE "\0" \
+ "autoscr_addr=" MV_AUTOSCR_ADDR "\0" \
+ "autoscr_addr2=" MV_AUTOSCR_ADDR2 "\0" \
+ "mv_kernel_addr=" MV_KERNEL_ADDR "\0" \
+ "mv_kernel_addr_ram=" MV_KERNEL_ADDR_RAM "\0" \
+ "mv_initrd_addr=" MV_INITRD_ADDR "\0" \
+ "mv_initrd_addr_ram=" MV_INITRD_ADDR_RAM "\0" \
+ "mv_initrd_length=" MV_INITRD_LENGTH "\0" \
+ "mv_dtb_addr=" MV_DTB_ADDR "\0" \
+ "mv_dtb_addr_ram=" MV_DTB_ADDR_RAM "\0" \
+ "dtb_name=" MV_DTB_NAME "\0" \
+ "mv_version=" MV_VERSION "\0" \
+ "dhcp_client_id=" MV_CI "\0" \
+ "dhcp_vendor-class-identifier=" MV_VCI "\0" \
+ "netretry=no\0" \
+ "use_static_ipaddr=no\0" \
+ "static_ipaddr=192.168.90.10\0" \
+ "static_netmask=255.255.255.0\0" \
+ "static_gateway=0.0.0.0\0" \
+ "initrd_name=uInitrd.mvbc-1G-rfs\0" \
+ "zcip=no\0" \
+ "netboot=no\0" \
+ "mvtest=Ff\0" \
+ "tried_bootfromflash=no\0" \
+ "tried_bootfromnet=no\0" \
+ "bootfile=mvblm72625.boot\0" \
+ "use_dhcp=no\0" \
+ "gev_start=no\0" \
+ "mvbcdma_debug=0\0" \
+ "mvbcia_debug=0\0" \
+ "propdev_debug=0\0" \
+ "gevss_debug=0\0" \
+ "watchdog=0\0" \
+ "skip_fpga=0\0" \
+ ""
+#define CONFIG_FPGA_COUNT 1
+#define CONFIG_FPGA CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
+
+#endif
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
More information about the U-Boot
mailing list