[U-Boot-Users] [PATCH][resubmit] QE IO: Add initial data to pin configuration + read/write functions

[Kim Phillips]

On Mon, 14 Apr 2008 12:59:28 -0500
"Andy Fleming" <afleming at gmail.com> wrote:

> On Sun, Mar 30, 2008 at 8:45 AM, David Saada <David.Saada at ecitele.com> wrote:
> >
> >  On the MPC83xx & MPC85xx architectures that have QE, add initial data to the
> >  pin configuration table (qe_iop_conf_tab). This is relevant for GPIO pins
> >  defined as output. One can setup a value of -1 to leave the value unchanged.
> >  QE initialization tables in all relevant boards were also replaced.
> >  In addition, add IO pin read & write functions.
> >  This patch also includes commands for reading and writing parallel I/O ports
> >  (pario command).
> >
> >  Signed-off-by: David Saada <david.saada at ecitele.com>
> 
> I have managed to apply your patch.  But I *still* had to correct
> several line-wrap errors.  I suggest that maybe nabble is not the
> solution you hope it is.  If you wish to continue submitting patches
> to opensource groups, it'll be a good idea to find a solution that
> works.  Suggestion: test by sending the email to yourself, and see if
> you can apply the patch to a clean branch.
> 
> Anyway, I'll wait for Kim's ACK before pushing it up into my dev-1.3.4 branch

see:

http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38991

Kim