[U-Boot-Users] [PATCH][resubmit] QE IO: Add initial data to pin configuration + read/write functions

[Andy Fleming]

On Sun, Mar 30, 2008 at 8:45 AM, David Saada <David.Saada at ecitele.com> wrote:
>
>  On the MPC83xx & MPC85xx architectures that have QE, add initial data to the
>  pin configuration table (qe_iop_conf_tab). This is relevant for GPIO pins
>  defined as output. One can setup a value of -1 to leave the value unchanged.
>  QE initialization tables in all relevant boards were also replaced.
>  In addition, add IO pin read & write functions.
>  This patch also includes commands for reading and writing parallel I/O ports
>  (pario command).
>
>  Signed-off-by: David Saada <david.saada at ecitele.com>

I have managed to apply your patch.  But I *still* had to correct
several line-wrap errors.  I suggest that maybe nabble is not the
solution you hope it is.  If you wish to continue submitting patches
to opensource groups, it'll be a good idea to find a solution that
works.  Suggestion: test by sending the email to yourself, and see if
you can apply the patch to a clean branch.

Anyway, I'll wait for Kim's ACK before pushing it up into my dev-1.3.4 branch