[U-Boot-Users] ppc4xx: gpio setup broken for ppc405ep

[Stefan Roese]

On Wednesday 23 April 2008, Markus Brunner wrote:
> After some emails with John from AMCC here are the Results:
>
> About the "random" tri-state select settings in the tables for alternate
> function for 440EP

Thanks for the update here.

<snip>

> The high/low addresses of the select registers of 405EP and the way they
> are assigned to the pins are like any other amcc processor. This means the
> current Users manual is wrong and will be updated.

OK, thanks for contacting AMCC here.

<snip>

> So we've got to change something with the gpio setup.

Patches welcome. :)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================