[U-Boot-Users] Newbie in U-Boot, Some Queries
Frank
frannk_m1 at yahoo.com
Mon Apr 28 18:31:25 CEST 2008
--- raajesh.n at indiatimes.com wrote:
>
> HI ,
>
> I am newbie to U-Boot, I have a customized board with u-boot
> with it, I have seen through top level makefile of
> U-Boot.Below stated is what I have observed from makefile.
>
> 1. First initialization of processor (ARM922t in my case) is
> done in CPU folder with Startup.S where this assembly routine
> will call low_level_init code for initialization of RAM of
> customized board.
>
> 2. Further I have observed rest all code which are required
> for boot-up is made as library and compiled at once.
>
> I would like to know how the code flow of U-Boot takes place
> , which are all the files which will be called in sequence
> while boot operation takes place, as far I have seen the code,
> Startup.S is one which starts first clearing Stack & PC which
> will further calls low_level_Init, I am unable to know how
> U-Boot works further from this place.
>
> I would request U-Boot users to share there knowledge in
> explaining me how the code flow of U-Boot takes place, which
> will help me in finishing my project where RAM & Flash is
> changed.
>
>
> Best Regards,
> Rajesh
>
cscope is your friend...
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
More information about the U-Boot
mailing list