No subject

loaded into ram and then using the "eeprom write"
command we should be able to program the eeprom. 
=> tftp 100000 eeprom.bin  
=> md 100000
=> eeprom write 100000 0 100
=> eeprom read 150000 0 100
=> md 150000
However, when I try the above and check the eeprom
content only the last few bytes are programmed. Any
idea? How to generate this bin file? Also, the "imd"
command is not working properly on my set up.

I am using u-boot version 1.1.2 on a custom board with
mpc8541 cpu.

Thanks much for any help!

Regards,
Rahmat 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com