[U-Boot] NAND: bad block in whole chip
Scott Wood
scottwood at freescale.com
Tue Aug 12 19:57:38 CEST 2008
Alemao wrote:
> Hi all,
>
> Im trying to use my NAND flash at MPC8360E-RDK based board.
> But it seems that the whole chip is bad blocked.
> Dont know if Im missing something... below some outputs:
Odds are that something is broken in the NAND driver, and you're reading
garbage.
> Any help/suggestions welcome.
>
>
> Im using U-Boot-1.1.4 with NAND and FSL_UPM drivers from U-Boot-1.3.3
Try using the latest u-boot.
-Scott
More information about the U-Boot
mailing list