[U-Boot] [PATCH] Remove gap fill in srec object
Ricardo Ribalda Delgado
ricardo.ribalda at uam.es
Fri Aug 22 18:35:42 CEST 2008
Srec files do need gap fill: The load address is specified in the file.
On ppc, a common object consist on u-boot on the begining of the memory
and a jump and tlb setup on the last part of the memory (0xfffffffe).
If the gap is included, u-boot can produce a 4 Gigabyte object!, with no
more info that the srec.
On the other hand, it cant be avoided in the .bin object. It has no
information about memory location.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda at uam.es>
---
Makefile | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Makefile b/Makefile
index 8c90dab..f02ab65 100644
--- a/Makefile
+++ b/Makefile
@@ -290,7 +290,7 @@ $(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.srec: $(obj)u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
+ $(OBJCOPY) -O srec $< $@
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
--
1.5.6.3
More information about the U-Boot
mailing list