[U-Boot] Pull request - net
Wolfgang Denk
wd at denx.de
Wed Aug 27 13:55:18 CEST 2008
Dear Ben Warren,
In message <48B50654.3050509 at gmail.com> you wrote:
>
> The following changes since commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e:
> Kumar Gala (1):
> FSL DDR: Remove old SPD support from cpu/mpc86xx
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-net.git master
>
> Andrew Dyer (1):
> dm9000 remove dead external phy support, gpio fix
>
> Ben Warren (7):
> Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
> Moved initialization of MCFFEC Ethernet driver to CPU directory
> Moved initialization of GRETH Ethernet driver to CPU directory
> Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
> Moved initialization of ULI526X Ethernet driver to board code.
> Moved conditional compilation to Makefile for SK98 Ethernet driver
> Moved initialization of SKGE Ethernet driver to board code.
>
> Peter Tyser (1):
> Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
>
> Remy Bohmer (2):
> Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
> Fix bogus error message in the DHCP handler
>
> TsiChung Liew (2):
> Fix ColdFire FEC warning messages
> ColdFire: Add FEC Buffer descriptors in SRAM
>
> board/bf537-stamp/bf537-stamp.c | 10 ++
> board/freescale/mpc8610hpcd/mpc8610hpcd.c | 10 ++
> board/sl8245/sl8245.c | 13 +++
> common/cmd_net.c | 10 +-
> cpu/leon2/cpu.c | 9 ++
> cpu/leon3/cpu.c | 8 ++
> cpu/mcf523x/cpu.c | 14 +++
> cpu/mcf52x2/cpu.c | 15 +++
> cpu/mcf532x/cpu.c | 14 +++
> cpu/mcf5445x/cpu.c | 14 +++
> cpu/mcf547x_8x/cpu.c | 21 ++++
> drivers/net/bfin_mac.c | 2 +-
> drivers/net/dm9000x.c | 159 +++--------------------------
> drivers/net/dm9000x.h | 21 ++++
> drivers/net/fsl_mcdmafec.c | 19 ++--
> drivers/net/greth.c | 2 +-
> drivers/net/mcffec.c | 40 +++++++-
> drivers/net/sk98lin/Makefile | 20 +---
> drivers/net/sk98lin/skaddr.c | 4 -
> drivers/net/sk98lin/skcsum.c | 4 -
> drivers/net/sk98lin/skge.c | 4 -
> drivers/net/sk98lin/skgehwt.c | 5 -
> drivers/net/sk98lin/skgeinit.c | 4 -
> drivers/net/sk98lin/skgemib.c | 4 -
> drivers/net/sk98lin/skgepnmi.c | 4 -
> drivers/net/sk98lin/skgesirq.c | 4 -
> drivers/net/sk98lin/ski2c.c | 4 -
> drivers/net/sk98lin/sklm80.c | 4 -
> drivers/net/sk98lin/skproc.c | 4 -
> drivers/net/sk98lin/skqueue.c | 4 -
> drivers/net/sk98lin/skrlmt.c | 4 -
> drivers/net/sk98lin/sktimer.c | 4 -
> drivers/net/sk98lin/skvpd.c | 4 -
> drivers/net/sk98lin/skxmac2.c | 4 -
> drivers/net/sk98lin/uboot_drv.c | 8 +--
> drivers/net/sk98lin/uboot_skb.c | 5 -
> net/bootp.c | 3 +
> net/bootp.h | 2 +-
> net/eth.c | 24 -----
> 39 files changed, 227 insertions(+), 281 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If God wanted me to touch my toes, he'd have put them on my knees.
More information about the U-Boot
mailing list