[U-Boot-Users] [PATCH] Enable the isdram command on the MPC8360EMDS board

[Kim Phillips]

On Sat, 12 Jan 2008 13:24:14 -0500
Jerry Van Baren <gvb.uboot at gmail.com> wrote:

> The isdram command prints out decoded information the "serial presence
> detect" (SPD) chip on the SDRAM SIMMs.  This can be very helpful when
> debugging memory configuration problems.
> 
> Signed-off-by: Gerald Van Baren <vanbaren at cideas.com>
> ---

applied.

Thanks,

Kim