[U-Boot-Users] [PATCH] ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5

Stefan Roese sr at denx.de
Thu Jan 17 14:35:18 CET 2008


Signed-off-by: Stefan Roese <sr at denx.de>
---
 board/netstal/hcu4/Makefile |    4 ++--
 board/netstal/hcu4/hcu4.c   |    1 +
 board/netstal/hcu5/Makefile |    4 ++--
 board/netstal/hcu5/hcu5.c   |    3 ---
 board/netstal/hcu5/sdram.c  |   23 +++++++++++------------
 5 files changed, 16 insertions(+), 19 deletions(-)

diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile
index c0d719f..b13d9d4 100644
--- a/board/netstal/hcu4/Makefile
+++ b/board/netstal/hcu4/Makefile
@@ -27,11 +27,11 @@ vpath hcu_flash.c ../common
 vpath nm_bsp.c ../common
 
 # NOBJS : Netstal common objects
-NOBJS	= fixed_sdram.o hcu_flash.o nm_bsp.o
+NOBJS	= ../common/fixed_sdram.o ../common/hcu_flash.o ../common/nm_bsp.o
 COBJS	= $(BOARD).o
 SOBJS	=
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) $(NOBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 NOBJS	:= $(addprefix $(obj),$(NOBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
index 714b98e..4fbe701 100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@ -37,6 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #if defined(DEBUG)
 void show_sdram_registers(void);
 #endif
+long int fixed_hcu4_sdram (unsigned int dram_size);
 
 /*
  * This function is run very early, out of flash, and before devices are
diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile
index 9645e45..9f248a4 100644
--- a/board/netstal/hcu5/Makefile
+++ b/board/netstal/hcu5/Makefile
@@ -26,11 +26,11 @@ vpath hcu_flash.c ../common
 vpath nm_bsp.c ../common
 
 # NOBJS : Netstal common objects
-NOBJS	= hcu_flash.o nm_bsp.o
+NOBJS	= ../common/hcu_flash.o ../common/nm_bsp.o
 COBJS	= $(BOARD).o sdram.o
 SOBJS	= init.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) $(NOBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 NOBJS	:= $(addprefix $(obj),$(NOBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index c5e0f08..2c7afe2 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -497,9 +497,6 @@ int post_hotkeys_pressed(void)
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
-	u32 val[4];
-	int rc;
-
 	ft_cpu_setup(blob, bd);
 
 }
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index 83d9456..5435de1 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -62,6 +62,11 @@ void dflush(void);
 #define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000 /* ECC correcting on */
 #define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
 
+#define ECC_RAM				0x03267F0B
+#define NO_ECC_RAM			0x00267F0B
+
+#define HCU_HW_SDRAM_CONFIG_MASK	0x7
+
 #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
 	/* disable caching on DDR2 */
 
@@ -71,6 +76,7 @@ void board_add_ram_info(int use_default)
 {
 	PPC4xx_SYS_INFO board_cfg;
 	u32 val;
+
 	mfsdram(DDR0_22, val);
 	val &= DDR0_22_CTRL_RAW_MASK;
 	switch (val) {
@@ -163,18 +169,17 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes)
 
 	/* Check whether vxWorks is using EDR logging, if yes zero */
 	/* also PostMortem and user reserved memory */
-	magic= in_be32(start_address  + num_bytes -
-			(CONFIG_PRAM*1024) + sizeof(u32));
+	magic = (u32 *)in_be32((u32 *)(start_address + num_bytes -
+				       (CONFIG_PRAM*1024) + sizeof(u32)));
 
 	debug("\n%s:  CONFIG_PRAM %d kB magic 0x%x 0x%p -> 0x%x\n", __FUNCTION__,
 	       CONFIG_PRAM,
-	       start_address  + num_bytes - (CONFIG_PRAM*1024) + sizeof(u32),
+	       start_address + num_bytes - (CONFIG_PRAM*1024) + sizeof(u32),
 	       magic, in_be32(magic));
 	if (in_be32(magic) == 0xbeefbabe)
-		num_bytes -= (CONFIG_PRAM*1024)  - PM_RESERVED_MEM;
+		num_bytes -= (CONFIG_PRAM*1024) - PM_RESERVED_MEM;
 #endif
 
-
 	sync();
 	eieio();
 
@@ -204,7 +209,6 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes)
 
 	return;
 }
-
 #endif
 
 
@@ -215,9 +219,6 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes)
  ************************************************************************/
 long int initdram (int board_type)
 {
-#define	HCU_HW_SDRAM_CONFIG_MASK 0x7
-#define INVALID_HW_CONFIG   "Invalid HW-Config"
-	u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER;
 	unsigned int dram_size = 0;
 
 	mtsdram(DDR0_02, 0x00000000);
@@ -228,7 +229,7 @@ long int initdram (int board_type)
 	mtsdram(DDR0_03, 0x02030602);
 	mtsdram(DDR0_04, 0x0A020200);
 	mtsdram(DDR0_05, 0x02020307);
-	switch (*hwVersReg & HCU_HW_SDRAM_CONFIG_MASK) {
+	switch (in_be16((u16 *)HCU_HW_VERSION_REGISTER) & HCU_HW_SDRAM_CONFIG_MASK) {
 	case 1:
 		dram_size = 256 * 1024 * 1024 ;
 		mtsdram(DDR0_06, 0x0102C812);  /* 256MB RAM */
@@ -259,8 +260,6 @@ long int initdram (int board_type)
 	mtsdram(DDR0_19, 0x1D1D1D1D);
 	mtsdram(DDR0_20, 0x0B0B0B0B);
 	mtsdram(DDR0_21, 0x0B0B0B0B);
-	#define ECC_RAM  0x03267F0B
-	#define NO_ECC_RAM  0x00267F0B
 #ifdef CONFIG_DDR_ECC
 	mtsdram(DDR0_22, ECC_RAM);
 #else
-- 
1.5.4.rc3





More information about the U-Boot mailing list